Spark R&D Arc für Splitboard (2021)

Dieses refurbished Snowboard wird im Zuge unserer Partnerschaft mit Blue Tomato verkauft. Die Snowboards waren vormalige Verleihmodelle und sind dadurch deutlich günstiger als ein Neukauf. Alle refurbished Snowboards werden vor dem Verkauf vollständig geprüft, aufbereitet und serviciert und sind nun für dich exklusiv auf refurbed erhältlich.

The Spark R&D Arc Pro is the lightest and most powerful splitboard binding worldwide

The Spark R&D Arc Pro Splitboard bindings are made with incredible attention to detail, without compromise. The Arc Pro bindings all offer the same advantages as the standard Arc bindings, but are equipped with even higher quality materials. Carbon reinforced nylon highbacks, full Pebax plastic, 7075 aluminum heel loops, 7075-T6 aluminum pivot pins and seven custom screws and hardware parts. The Pro Series bindings can ONLY be used with Fusion Moulded Touring Brackets due to the aluminium pivot pins.

Tesla T1 Splitboard Technology
The T1 system now has only one ‘Climbing Wire’ instead of 2 to save you time and weight. This bracket is built into the baseplate and allows you to easily adjust the tilt angle to 12 degrees for flatter climbs, or 18 degrees for steeper areas. With snap ramps and touring brackets you can easily slide the T1 binding sideways into touring mode. You simply slide the binding onto the offset touring bracket and close the snap ramp to secure everything without tools, pins, cables or constant groping.

Highback
The carbon reinforced nylon highback of the Arc Pro was developed for a medium flex and a surfy riding feel. The material mix is more responsive, lighter and stiffer than the conventional glass fibre reinforced highbacks. 

Baseplate
A CNC-milled aluminium baseplate with maximum recesses provides power and lightness. The 7075 aluminium heel loops are thinner and lighter than the standard heel loops while maintaining the required strength.

Straps
The Pebax® Pillow Line Straps are made of Pebax® plastic, a high quality material that provides consistent stiffness and improved toughness in cold conditions while being 20 % lighter.

Features

• Tesla T1 Splitboard Technology
• CNC milled baseplate
• 7075 aluminium heel loops
• Carbon reinforced nylon highback
• Pebax® Pillow Line Straps
• Custom 7075-T6 aluminum hardware - 65 % lighter than standard stainless steel parts
• One Climbing Wire
• Burton Bomber Buckles
• Hollowed screws to save weight
• Comes with Tesla Touring Brackets, Tesla T1 Heel Rests, mounting screws and a Spark Pocket Tool